Through the water control to complete the plastic products quality source control

We found that casting the plastic products, it need for water right amount.  If there is no suitable water, you can not produce high-quality materials, there is no quality of plastic products, all the problems from the source.

If there is no suitable water, it can not produce high-quality materials products.

Plastic particles around too much water will weaken the structural integrity of the plastic, so that transparent plastic becomes turbid, and damage to the product’s finish, too little water will cause the product is brittle, easy to crack.

Many of our customers come from the medical, automotive industry, they can be said to the product appearance requirements are too strict, so we need to know if you are using a good plastic.

Any kind of  Chinese plastic company to control water is a headache problem, the technology is not mature, production costs increased, slowing the production process.
Plastic manufacturers usually use a dryer to reduce the moisture in the plastic particles, dryer can not test the water, casting into an expensive test and error process.

In order to solve this problem, the United States, Europe and China corporation have developed a new moisture analyzer that can determine the moisture content of your plastic before they are cast.

The invention of these devices allows a test to be done in a few minutes, rather than the traditional way of doing it and giving you the time to make a decision on the sample information.

You can pull the resin sample from a drying rack, quickly determine the water content, and know whether it is ready for injection or not.
The production workshop able to test the moisture content between the drying furnace and the injection process, and allow the quality control to manage the defects before the potential defects occur.
This new discovery means that fewer products are thrown away at the end of the line, and less energy is wasted.
In such a process, the value of the speed of a moisture analyzer is not only convenient, but also to ensure that plastic does not absorb moisture from the atmosphere, when you wait for a test.
It is based on the statistical analysis, which is particularly useful when the test, with the time move, usually tester is an easy-to-use programming tool, which means you can spend less time and more time to prepare and test production.
All of our test models are made of tough material to withstand the harsh conditions

Cnmoulding believe that technology updates will inspire new ideas, new technology will greatly improve production efficiency and reduce production costs, the use of plastic water analysis, so that the price of plastic manufactured goods is lower, the quality, the higher the efficiency.