Through the water control to complete the plastic products quality source control

We found that casting the plastic products, it need for water right amount.  If there is no suitable water, you can not produce high-quality materials, there is no quality of plastic products, all the problems from the source.

If there is no suitable water, it can not produce high-quality materials products.

Plastic particles around too much water will weaken the structural integrity of the plastic, so that transparent plastic becomes turbid, and damage to the product’s finish, too little water will cause the product is brittle, easy to crack.

Many of our customers come from the medical, automotive industry, they can be said to the product appearance requirements are too strict, so we need to know if you are using a good plastic.

Any kind of  Chinese plastic company to control water is a headache problem, the technology is not mature, production costs increased, slowing the production process.
Plastic manufacturers usually use a dryer to reduce the moisture in the plastic particles, dryer can not test the water, casting into an expensive test and error process.

In order to solve this problem, the United States, Europe and China corporation have developed a new moisture analyzer that can determine the moisture content of your plastic before they are cast.

The invention of these devices allows a test to be done in a few minutes, rather than the traditional way of doing it and giving you the time to make a decision on the sample information.

You can pull the resin sample from a drying rack, quickly determine the water content, and know whether it is ready for injection or not.
The production workshop able to test the moisture content between the drying furnace and the injection process, and allow the quality control to manage the defects before the potential defects occur.
This new discovery means that fewer products are thrown away at the end of the line, and less energy is wasted.
In such a process, the value of the speed of a moisture analyzer is not only convenient, but also to ensure that plastic does not absorb moisture from the atmosphere, when you wait for a test.
It is based on the statistical analysis, which is particularly useful when the test, with the time move, usually tester is an easy-to-use programming tool, which means you can spend less time and more time to prepare and test production.
All of our test models are made of tough material to withstand the harsh conditions

Cnmoulding believe that technology updates will inspire new ideas, new technology will greatly improve production efficiency and reduce production costs, the use of plastic water analysis, so that the price of plastic manufactured goods is lower, the quality, the higher the efficiency.


The Internet provides custom mold making service as a demonstration version

The Internet provides service of custom mold making, cnmoulding can be used as a demonstration version.

Companies to provide plastic molding services in various industries, such as automotive, medical, transparent products, we use the Internet and customers around the world to keep in touch.

Rely on the production base in China, in the use of the latest technology to develop and provide customers with plastic mold manufacturing around the world.
According to customer specifications custom mold making , because of  use the Internet to reduce time and cost for mold manufacturing design and engineering.
Through the Internet e-mail to send drawings, SKYPE for online communication, to provide customers with a complete set of plastic injection services.

Efficient work system

After receipt of the drawings, tooling department submit offer within 12 hours for the project, and the tooling engineer received from customers of the purchase order, to provide 3D mould design drawings within  2-3 days, mold flow analysis, and according to customer needs the file format by e-mail to them.
Once the drawing is approved by the customer, they begin to make the mold.
When the customer approves the plastic molded sample, according to the customer’s request, the mold will send to the port of the world.
Because of the popularity of the Internet, the work is just as easy as you work with door neighbor.
The company’s owner Kennyhan revealed that this whole process from the mold development and final delivery has become the standard production process for the export of the mold industry in China.

Internet based mold development is faster, strictly comply with the customer’s account, to provide qualified injection molding products on time to reach the customers hand, there is no one minute delay.
Strict drawings and sample approval process to ensure the delivery of plastic products in full compliance with customer requirements.
In addition, we also provide a complete freight forwarding, either by sea or by air, express delivery services will be delivered to our products in any place in the world.

All kinds of supporting logistics support work

Cnmoulding molding maintains a systematic and transparent program that enables customers to control the quality, cost and production cycle of the product.
Faster approval process will be faster plastic mold design and manufacturing with guarantee.
The company has a wealth of injection mold design experience, to provide customers with the product re-design, can significantly reduce the cost and cycle of mold manufacturing.
This is the cause of every industrial customer can rely on our production technology and product quality.
Using the Internet, Cnmoulding as an industry standard, and constantly provide convenience and a simple way to get customized tooling manufacturing for customers from all over the world

Speed Up Your Development Cycle and Save cost 30%

It is true to use a unique plastic injection moulding company from Shanghai, China!

You can not imagine the situation, than you are in your own domestic procurement is faster and more reliable. In practice with 20 years of export, we have professional English translation ability, there will be no language barrier, you will get almost immediately to the problem or problems in response to rapid tooling is product development you need only a few days, the development of new projects will be faster, more reliable, you won’t have to worry about quality or copyright issues.

You will get our offer of quick interactive quote service, speed is the key factor in the success of the market to get the project, there is no excuse to the customer, you need to wait a few days to get a quote. Make sure your preferred mold supplier can take your offer in a day.Even if you haven’t finished drink your coffee, the offer is in your hands.

We have some tips to help you easily achieve, to help reduce your development costs 30%, to provide you with the development speed up to 50%, due to the traditional manufacturing industry.

Make use of the manufacturing analysisuniqueness injection moulding system is the correct manufacturing process for your project, you can quickly solve the problems in your area, speed up the production process, the quality will be as expected and negotiated..

One time free re-design -We know that some of the complex parts are designed to communicate through interaction with the engineer. If it can be molded plastic, we can do it. If it can be changed, we can help you to update the design , unlike some of the plastic injection moulding part manufacturer , we will not ask you to redesign your part, and more work to be done by us.

World trade association data show china not simple workshop in plastics industry

China vs Us in plastics industry

China is not simple workshop of plastics industry in the world

If you come to Shanghai, and stay for a long time, your feeling is, America has to face the challenge from China, China is not the simple production workshop in the world. Companies such as Apple, China has become a part of the manufacturing chain, people around the world to order Apple products that produced in China. Chinese picture in the plastics industry is more beautiful. The moment of a news, Chinese stock Corporation, home appliance maker Haier Group acquired general electrical appliances, home appliances with Manufacturing plants and 12000 employees. Haier group’s strategy and strategic thinking direction in short, it is like any large multinational manufacturing company. At the same time, due to the problem of the exchange rate, a large number of Chinese companies are all over the world acquisition, which and the plastic injection molding industry related news, plastic chemical acquisition of German plastics machinery giant Krauss Maffei group. Since 2000, China has been the world’s largest injection molds and plastic products market, not only is the price, China also has some of the best technologies. Therefore, from this point of view, the role of Chinese injection mold, has not made at least the profit of the industry supply chain link.

Western people  view of china plastics industry

Western people generally have a point of view. China is still a challenge, but also often want to write their own rules, and do not comply with the rules of the past, like the United States Wild West, for example, in intellectual property, especially for smaller manufacturing companies. Not long ago, American mold equipment supplier progress components company, submitted a complaint against China local company selling fake products. Presidential Gelunsidake progress components of a company’s estimate, the company 80 percent of the products and the company’s name. In China all is fake. Despite the many aspects of the reform in China, in the aspects of intellectual property rights, China has not made sufficient progress, so they are worried that China’s reform can not continue. But the Chinese plastics industry market is full of temptation, no one is willing to give up this market. Snap this market, which for most global company seems to have enough.

We to the data speak,  Last year, the German plastics industry and rubber machinery industry to the United States and China issued the same number of machinery and equipment ($7 billion to 8 billion dollar value). Germany is the world’s largest plastics industry machinery exporter, for the United States, China is the largest export market. According to reports, China’s domestic plastics industry market is about 8 billion usd annual, compared to the United States market, According to industry experts estimate that the value is only half of it. The size of China’s plastics industry market will naturally create ,some of the very global competitiveness of the company. They have hone their teeth in the domestic, and now they began to take risks. China’s injection mold is still full of vitality in the world in plastics industry market. Last year, China’s demand for plastic has increased by ten percent. Now a popular saying, to bring manufacturing back to the United States, some argue that some of the manufacturing sector is leaving China to other low-cost countries. But no matter how much reflux really happened, China is still a strong force in the plastic injection molding industry. At the same time, Louisville, Kentucky, Ge appliances factory headquarters is mentioned in many media reports data shows an example because it increases the thousands of jobs. Haier Group will own the company. This is still a good example, the return of the United States makes this China’s injection molding plant in the United States to become the largest injection plant It is speculated that these investments Haier group, not only to boost the U.S. economy, but also to revitalize China’s plastics manufacturing industry recovery. This shows that the global manufacturing complex relationships, mutual win reciprocity, which is today news to share with you.

Advantages of plastic medical instrument

Advantages of plastic medical instrument

plastic medical instrument

Use plastic medical apparatus and instruments called a major initiative of the medical profession. From drug and pharmaceutical packaging products, to syringes, tubes, surgical instruments and other disposable medical equipment can be seen in the presence of plastic instruments.
Disposable medical instrument market demand potential is so great ,why largely because of its advantage following aspects:
1, light weight, and effort, help reduce fatigue caused by surgery doctor for a long time. More suitable for human blood and muscle tissue, so the more effective.
2, tough is good, anti-permeable, durable, plastic parts can also be used normally at high temperatures.
3, Transparent , medical procedures can be better observed, especially during surgery.
4, easy to molding, suitable for the production of a variety of shapes, complex medical equipment and supplies, and simply use the low-cost production process. Use disinfectant or sterilizing temperature corrosion does not occur, or color change phenomenon.
5, compared to metals and other raw materials, low cost, suitable for the production of disposable consumables, and after sterilization of packaging materials used to help reduce the risk of infection.
6, As compared with ceramic or the like brittle glass material, a more secure, especially as packaging material.

Aging population will up medical instrument quantity demanded

With the increase of the proportion of population growth and an aging population, the demand for plastic medical instrument continued to expand, particularly into the body of the equipment. The use of medical instrument to diversify from a single, volume size is shrinking, now one can replace equipment more than the previous equipment. Because many outstanding advantages of plastic medical equipment, pharmaceutical industry in the future course of development, its market share and influence will grow.

Powder Injection Molding Market

At present, the ceramic injection molding technology to provide a better, cautious, beautiful product, for the replacement of metal injection molding. In 2015, medicine and the oral cavity orthodontic industry achieved nearly 25% of the global market share, the main reason is that the powder precision injection molding technology to improve and create, forming an industry’s main products. These brackets are very small and precise plastic parts.

Introduction to 3D printing technology

Last news about 3D Printing -Cyber security Risks In 3D Printing

The first 3D printing general electric commercial jet engine, has been certified by the Federal Aviation Administration of the United States.Scientists found that 3D printing in the direction of printing and insertion, there are network security impact.They reported that the orientation of the product during 3D printing could make as much as a 25 percent difference in its strength.And economic concerns also influence how a manufacturer prints a product.Due to the existence of this problem, 3D printed parts, such as metal molds use in injection molding for high temperature and pressure conditions, may eventually lead to failure of product development.This may be a good thing for all injection mold manufacturers, should be for the company’s business will not give too much to steal 3D printing, is a rapid prototyping technique, which is a digital document based on the model, it was used powdered metal or plastic materials and bonded by the printed layer by layer technology way to construct the object.

3D printing materials are usually printers using digital technology to achieve. Often in the mold manufacturing, industrial design and other fields are used to make the model, and then gradually for direct manufacturing of some products, there have been made using this technique to print parts. The technology in the jewelry, footwear, industrial design, architecture, engineering and construction (AEC), automotive, aerospace, dental and medical industries, education, GIS, civil engineering, guns, and other fields have applied.

Everyday life of ordinary printer can print flat items used computer design, and the so-called ordinary printers and 3D printer works basically the same, but somewhat different printing materials, printing materials are ordinary printer ink and paper, while the 3D printer built with metal , ceramic, plastic, sand and other different “printed materials”, are real materials, the printer connected to the computer through computer control can be “printed material” layer laminated together, eventually became the blueprint on your computer kind. In layman’s terms, 3D printer can “print” of a 3D object in real devices, such as printing a robot toy car printing, printing of various models, and even food, etc.. The reason colloquially called “printer” is a reference to the technical principles of ordinary printer, because the process of layering and ink-jet printing process is very similar. The three-dimensional printing technology called 3D printing technology.

There are many different 3D printing techniques. They differ in the way that the material is available, and to create build parts with different layers.

[3] 3D printing materials are commonly used in fiberglass nylon, durable nylon material, gypsum materials, aluminum, titanium, stainless steel, silver, gold, rubber-like material.

type Technologic Raw material
press 熔融沉积式 (FDM) Plastics molding
string 电子束自由成形制造(EBF) Any alloy
coins 直接金属激光烧结(DMLS) Any alloy
电子束熔化成型(EBM) Titanium alloy
选择性激光熔化成型(SLM) Titanium alloy,Cobalt chromium alloy, stainless steel, aluminum
选择性热烧结(SHS) Plastics molding
选择性激光烧结(SLS Plastics molding
powder spray 3D printing 石膏3D打印 (PP) Gypsum
Layer press 分层实体制造(LOM) Paper, plastic film, metal film
Photo polymerization 立体平板印刷(SLA Photocurable resin
数字光处理 (DLP) Photo curable resin

3D printing technology is not used in mass production, so some experts advocate 3D printing is the third industrial revolution, this argument is just agimmick. Foxconn OEM for Apple iPhone has been for many years. Gou made with 3D printing phones to illustrate 3D printing products can not only see, because we can not add electronic components, electronic product scan not be produced as the amount of these products. 3D printing even without the production of electronic products,but by material constraints,other products can be produced very little, “even if the products produced, can not mass production, but also on the broken Yishuai.
“3D printing is indeed more suitable for some small-scale manufacturing,especially high-end customized products, such as auto parts manufacturing, although the main material is plastic, but the future of metallic materials will certainly be applied to 3D printing in the past,” said Crump, 3D printing technology has entered the dental, jewelry, medical industry,the scope of future applications will be more widely available.

3d printing gun

3d printing service at  china injection molding company

Evaluation standard of high quality plastic mold company in China

Aston Martin complain china plastic mold company

Aston Martin complain china plastic molding company

Evaluation standard of high quality plastic mold company in China

Cnmoulding  plastics mold company , A china leader in custom injection molded plastics manufacturing, we announced have buy one new Haitian 100 ton injection molding presses.  With the addition of the new presses . Cnmoulding has injection molding presses ranging in size from 60 tons to 650 tons.  The new presses will be used to substantially expand the company’s services in a variety of areas for the benefit of cnmoulding customers.

“Investment in our new machine provides us with an increased capacity, as well as by increasing our ability to grow. We try to continue to improve, always stand in the peak of science and technology, and strive for the interests of customers.Mold quality is the foundation of our success, 100% of our new plastic molds only take 1 time or 2 times testing before we put them into mass production or send to oversea customers. From materials incoming to finished work piece before mold assembly, we have a fully implemented quality control process to ensure lower re-work rate, lower wastage, high efficient and short delivery term. From first article inspection to process capabilities study , we guarantee production is stable and correctness. All mold steel/resin we used is strictly following customers’ quality requirements, steel purchased certificates and property specification of plastic raw materials are always available.” said Cnmoulding plastics manager, kennyhan. “It is yet another example of our commitment to producing injection molded plastic products of the highest quality.”

100ton injection molding process

 Luxury sports car maker Aston Martin has announced a global recall

Aston Martin ignore its internal processes for a range of procurement, vendor and product monitoring problems,since November 2007 produced a total of 17,590 sports car, called the discovery of parts of China for the production of sub-suppliers in Shenzhen KEXIANG mold company(Shenzhen KeXiang Mould Tool Co Limited) use fake plastic material. In this regard, caught in storm in Shenzhen KEXIANG mold company responsible Ang Zhang announced that denies its production Aston Martin • Over parts. China has a lot of plastic injection mold company and products manufacturer, they serve different target customers, some companies large scale, but the basic outsourcing, in fact, customers need to find is a real experience, and provide long-term senior custom mold for overseas customers and plastic products suppliers, CNMOULDING no doubt that customers really need to find manufacturers.Since its establishment in 1997, the years from different companies for their commitment to providing quality automotive parts, medical equipment, industrial supplies, electronic components, small appliances mold design and manufacture of lastic products processing factories. The company currently employs 80 people,The significance of the quality of the enterprise:

Quality control in china mold company

Parts made in a plastic injection molding process can have their own unique set of possible defects. That is why all of our employees are trained to spot these problems. The following is a listing of the most common defects associated with the plastic injection molding and transfer/compression molding processes:

Sink Marks: Sinking is caused by the outer skin of plastic solidifying while the material inside is still molten and viscous. As it cools and solidifies, the material compacts . The best way to avoid these dimples is to design the part with a consistent wall thickness. However, many times the effect of the sink mark can be minimized by adjusting molding parameters such as injection pressure and time.

Gas marks (burning): When molten plastic is injected into a mold cavity, the air that is in that cavity needs a place to escape. If the hot compressed air cannot escape, it may leave burn mark on the part. The best way to avoid gas marks is to strategically locate air vents of the proper depth within the mold. Adjustments to process parameters such as injection speed and screw speed can be altered to reduce or eliminate burning.

China injection molding income situation

injection molding

From China’s income situation difficult to see Chinese private enterprises, including ours plastic injection molding industry,The U.S. has 70% of the injection molding industry to move back, and if China plastic mold injection molding industry to continue survive, to break the monopoly of state-owned enterprises is inevitable.

Chinese household financial investigation and Research Center data show that “the financial industry, utilities, real estate is the highest level of annual wage income of three industries, other industries typically 1.9 to 2.6 times.” Investigation of the center come from different ownership enterprises wages of view, state-owned enterprises, the average wage level of 54,000, only 29,000 private enterprises, state-owned enterprises is the private sector average wage level is about 1.9 times. The average wage income of foreign companies is as high as 86,000.

“State-owned monopoly industries due to hold the telecommunications, electricity, energy, high-value resources, it was easier profitable addition to pay state taxes, as well as considerable profit retention by allowing for the issuance of employee benefits or develop shopping malls, resorts, hotels and other sideline; The relative crowding together in the competitive private manufacturing, consumer goods, foreign trade and other fields. junior staff the income gap between the two conservative estimate of about 2 times. “Zou Wenjiang said.

Analysis of state-owned enterprises pay system is not difficult to find, in addition to employees of state enterprises fundamental wage income, but also includes wages of hidden income, such as a variety of bonuses, subsidies, insurance, prepaid cards, in-kind and other benefits. Industry insiders estimate that this part of the income of employees of state enterprises accounts for about half of total revenue.

Chinese household financial investigation and research center director, dean of Southwest University of Finance and Economics plow willing to accept new financial reporter in an interview that, according to various sources of income contribution to income inequality perspective, wage income gap is caused by China’s current income uneven distribution of one of the main income gap on the overall contribution rate of 40 percent. Followed by the industrial and commercial income disparities, income up 20% of households with an average income of 22,000 yuan business, the average household income of the lowest 20% Business operating income of only 200 yuan. Typically, the main source of income of low-income households or agricultural production, 20% of the lowest-income households, accounting for nearly 50% of agricultural income, wage income and business income accounted for only 13% and 5%. This reflects the current low rate of return of agricultural production reality.

Our website, you will see what is the real Chinese competitors, the responsible plastic injection molding maker  -Fair competition in a non-potent weed

Economic recession and abnormal property prices in the struggling mold making industry

Mold making industry under the economic recession

China’s housing prices are destroying China’s manufacturing industry include mold manufuring 

As has been the  Europe customer service injection molding and mold making plant, we feel the order is very intuitive and sensitive, China’s official manufacturing data released in July rose slightly, with the outside world last month, the Chinese economy had negative growth not as expected.

The strategy of independent innovation Chinese set is the most profitable real estate behind, the local government is keen to engage in real estate development is all view of the typical performance, of course, “investment cadres” to know the progress of science and technology, innovation and production services, environmental benefits and benefit.

But the reality of the land finance will be located in Suzhou, the global sportswear brand Adidas announced that due to re integration of global resources strategy, global sportswear brand Adidas will close in the Suzhou Industrial Park, 100% wholly-owned subsidiaries, also related to at least 300 Adidas generation business, more than 300 thousand employees employment prospects.

Take the Suzhou Industrial Park, the global brand why suddenly to close their businesses in China? We do not fully understand, is a Chinese wage increase too fast, Adidas production line was forced to move to lower labor cost in Southeast Asian countries, labor technology promotion can obtain more and more multinational companies will be transferred to the Southeast (Nike factory. Nike closed in March 2009) in China only located in Jiangsu Taicang shoe factory, 1400 workers were forced to disband, the factory production moved to Vietnam. The mainland enterprises listed in Hong Kong underwear said on 2011, will be the high cost of production line from Chinese, transferred to Thailand and Kampuchea.

The second reason is a quarterly report, the U.S. Department of Commerce, the United States manufacturing foreign investment tax profits decline and rising trend of american’squotre-industrializationquot strategy is in force, the U.S. real economy is showing signs of revival. Though the report does not explicitly mention the manufacturingback trend, but it suggests that the United States the “comparative advantage” is picked up. Recently, a factory in Georgia, even to the Chinese export chopsticks stimulate people understand news on this topic: whether it is high or low, China will encounter the competitiveness of U.S. manufacturing challenges

At present Chinese manufacturing industry is in a critical period of ups and downs of the watershed “, the rapid rise in house prices to promote the price of land, factories and housing rental prices, more importantly, housing prices forced the government to raise the wage unceasingly promote the rational return of the price, these see the cost of forcing multinational companies manufacturing industry to make evacuation response the domestic manufacturing industry, is helpless layoffs

But by the HSBC (HSBC) at the same time released independent survey said that “Chinese manufacturers face significant deterioration in the business environment.” For this argument, China injection molding and mold makers are very much support, both from China Order injection mold or injection products, this year’s decline in new orders in large quantity, we are still doing the old customer’s order last year, but next year how kind of hard to say.
China officially released on Thursday July the government purchasing managers’ index (PMI) increased from 50.1 in June to 50.3, which means that manufacturing conditions improved slightly. However, the release of China HSBC PMI index fell to 48.2 in the previous month, but July’s 47.7 for the 11 months to the lowest level.

For the manufacturing sector, PMI reading above 50 indicates expansion in manufacturing, production is less than 50 indicates contraction. Most analysts had expected in July will be the official index fell below 50, they pointed out that China’s overall economy is continuing to slow. Injection molding industry with respect to China, the Chinese mold making opportunity is good, but now Chinese social values make fewer and fewer good injection mold maker, this is affecting the Chinese mold and injection molding industry.

HSBC and the differences between the official data will be re-triggered a kind of market speculation: Chinese government is trying to show a more optimistic picture of the Chinese economy, to support the people’s confidence in the Chinese economy, despite slowing economic growth.
ANZ Bank , chief China economist Liu Ligang (Liu Ligang) said that official data “will not change our overall assessment that Chinese economy continues to deteriorate.”

In recent weeks, Chinese officials seem to have begun to take the initiative to stabilize investor confidence of economists and commentators, so they believe that despite three years of China’s economic growth to slow down gradually, but the Chinese economy in good condition.
Two findings appear gaps, one possible reason is that HSBC survey focused on relatively small-scale private manufacturers, while the official PMI index mainly reflects the large-scale state-owned enterprise situation.
Not only is China the actual molds and injection molding industry slowdown in other sectors is not good, but a lot of excess capacity in the current circumstances it is not necessarily a bad thing, China mold manufacturing and injection molding industry need to rely on technology development, rather than by selling mold like selling iron did survive. Labor advantage is gone, China mold making and injection molding industry to rely on technology and management to survive.

Aircraft machines injection molded parts

injection moled parts

Aircraft machines component

CN-MOULDING as few china plastic injection molding company, that have capacity make new mould and invest new plastic injection molded parts for our customer,
We combine design, engineering and manufacturing in east of china, shanghai city.

With engineering and tool making operations in shanghia, China—a global capability that cuts lead times and allows for competitive baseline pricing.

The article describle about new injection molded parts used for Aircraft machines

and it use for aerial photo and video for production, film, movie.

It is our honor can make such high precision plastic injection molded parts through china mold maker what about Aircraft machines.

it is a vehicle that sustains itself in and propels itself through the air; an airplane, helicopter, glider, or the like. A spherical flying machine that can take off and land just about anywhere, roll along walls and hover like a helicopter was .

Injection Molding Company

Aircraft plastic part-made by CNMOULDING

Cnmoulding is owned and China business company specializes in aircraft windshield, window manufacturing, glass fiber fairing and plastic exterior and interior manufacturers, we have many years of production experience, production of all kinds of plastic accessories, remember this is China, a few factory specializing in the production of various types of related accessories CNMOULDING was the mark.